Use original quick-release accessories to achieve horizontal ; use two-claw adapter to achieve vertical . There are soft foams on top and sides of inner side of cage, which can be firmly fixed after camera is installed. Use rubber rings to enhance damping of screws, so that screws not loosen when riding motorcycles and bicycles, and there is no need to worry about camera falling off frame. The opening design at battery cover makes it easier to replace battery, and use of cage does not affect opening and closing of camera battery cover. Openings are reserved at bottom of cage and USB cover, and original quick-release accessories are installed seamlessly. The reasonable air avoidance design at screw allows screw and selfie stick to be easily screwed in, so you can enjoy a new experience. Rich expansion: Dual cold shoe expansion interfaces are reserved, which can be expanded to add fill lights and microphones. The cage-free silicone lens protective cover allows camera to be stored when not in use to avoid bumps and scratches. Light or display is different, the real color difference Material: Aluminum Alloy Color: As shown Package Contents: 1 x Camera Frame Case 1 x Lens protection cover 1 x vertical adapter 1 x wrench Only above package content, other products are not included. Note: Light reflection and different displays may cause color of item in picture a little different from real thing. The measurement allowed error is +/- 1-3cm.