Hydrogen Water Bottle with Colorful Lights Platinum Titanium Electrode 2 Gears 2 Concentrations Anti Leakage Portable Hydrogen Water Generator Black Item Type: Hydrogen Water Bottle Shell Material: Aviation Aluminum, Anodized Back Body Material: Food Grade PC Weight: Approx. 677g / 23.9oz Battery (Built In): Lithium Ion Battery, 2200mAh, Model: SW 1025 40 2P Hydrogen Production Water Quality: Pure Water, Distilled Water Working Time: 5-10 Minutes Electrolysis Method: Proton Film, Platinum Titanium Electrode Power Interface: 1A 5V USB Cable Type C Product Size: Approx. 198x63mm / 7.8x2.5in Hydrogen Concentration: 8000ppb Capacity: 208ml Water Bottle Mouth: Inner Diameter 30mm / 1.2in Usage: Self Contained Bottle Can Be Used With Water, Can Be Used With Mineral Water Bottles Directly Inserted, Two Ways How e: 1. The first step before use is to unscrew the cap. 2. Unscrew the base. 3. Remove the double handed rubber stopper. 4. Then assemble the water cups. 5. At this time we note that the bottom side of the cup body has an arrow, and the base of the arrow aligned with each other after the reverse rotation in order to make the bottle assembled, and then the cap assembled. 6. The bottle and the base of the grain corresponds to be considered tightened. 7. If the cup is out of power, take out the power cord, take a cell phone charger from home and plug it in to charge, after charging we can see the display is flashing, and so on the end of the flashing can be completed charging! 8. Add water should not be too full, eight full can be. 9. It is recommended to add 50 ° below the cool white water, barrel drinking water, pure water. 10. Screw the cap on the bottle after filling. 11. Click once to turn on hydrogen for 5 minutes, click twice to make hydrogen for 10 minutes. 12. If you need to pause or turn off the machine in the middle, just long press, you can turn off the machine. Warm tips: After the hydrogen production is completed, you need to press the top of the bottle pressure relief valve, in order to unscrew the cap. 13. If there is stain in the water cup, we need to clean it, unscrew the cap and the cup, the cap can be cleaned with white vinegar or citric acid. 14. Note that the base is not washable.