Application Hole Center:Cabinet hardware with 2.5inch (64mm) 3inch (76mm) 3.5inch (90mm) 3.75inch (96mm) 4inch (102mm) 4.5inch (115mm) 5inch (128mm) 6.25inch (160mm) hole centers;The wide size scope of application can satisfied what you different needs. Easy Installation:The mounting template will help install cabinet pulls fast and easily.Clear measurement lines drilling accurate installation holes.Find one of the pre-defined hole centers which worked for your pulls,use a pencil to circle it,and it was easy to mark a drilling all of the cabinets with a pencil. Drill Fearlessly:Once you've marked the hole center, fit the 3/16inch drill bit into your drill, but make sure the screws are 8/32inch . And be sure to drill from front to back.If you do have splintering, it will be on the inside where nobody can see it. Colour:As Shown Material:ABS Package Contents: 1 * cabinet door drilling Template 1 * Drawer Drilling Template 1 * Drill Bit. 1 * punch Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.