Kitchen Scale Digital Multi-function Stainless Steel Weighing Scale with LCD Display Electronic Medicine-Scale Measuring Black

¥7,490
配送料無料

Kitchen Scale Digital Multi-function Stainless Steel Weighing Scale with LCD Display Electronic Medicine-Scale Measuring Black

  • ブランド: Unbranded

Kitchen Scale Digital Multi-function Stainless Steel Weighing Scale with LCD Display Electronic Medicine-Scale Measuring Black

  • ブランド: Unbranded
価格: ¥7,490
販売元:
¥7,490
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

["brand new and high quality\nFeatures:\nHigh precision with 30g/0.001g accuracy, suitable for weighing gold, jewelry, medicine powder or other small things.\nLarge 5-digital blue LCD display for easy reading.\nDifferent units: g/oz/ozt/for t/ct/gn are available for most countries to use.\nThe count (PCS button) function gives you an accurate count and tare weighing function ensures more precise result.\nWind-shelter to prevent influencing the weighing accuracy by the interference of external environment.\nScale only, other accessories demo in the picture is not included!\n\nSpecification:\nPowered By: 2 x 1.5V AAA Battery (Not Included) \nMaterial: ABS\nCapacity and Accuracy: 30g/0.001g\nUnits: g/oz/ozt/for T/ct/gn (Switchable)\nNominal Value: 0.003g\nRepeatability: 0.002g\nBack Light: Blue Backlight\nFunctions: ON/OFF, UNITS, TARE, PCS \nLow Battery Alarm: Low\nDimensions: app.14.4 x 8.45 x 5.1cm/5.67 x 3.33 x 2.01in\nColor: Black\nQuantity: 1 Pc\n\nFunction Button and Instruction:\n1. ON/OFF (Switch on/off)\n Put batteries into the battery room of the scale, place the scale on a solid and flat board without wind and vibration, keep the bubble in the center of the black ring. Put ON/OFF will show 8888 then 0.000, it's ready to work. Press ON/OFF switch off the scale. If there is wind when weighing, please put down the wind shield.\n2. UNIT (UNIT switch button)\n Press [UNIT] to switch weighing unit: g/oz/ozt/for t/ct/gn.\n Press [UNIT] for key for 4 seconds, all the units will light up and unit OZ blink, then press PCS to hold or close this unit, Press UNIT to select next unit, unit g can not be closed. Press [UNIT] for 4 seconds to return normal weighing state.\n3. TARE\n for Touch [TARE] to for Re-zero.\n4. PCS (Counting function)\n Select 25pcs of samples(or 50, 75, 100pcs of samples) At normal weighing state, put the samples on the scale, then press PCS 4 seconds and the scale shows the weight of the samples, press PCS to confirm, then LCD will display PCS+ sample value. You can put more articles, the scale will show \"PCS XXX\", which is quantity of articles.\n\nCalibration Function:\nTurn on the scale, press ON/OFF for key for 4 seconds, the scale shows 0 then the weight value(if the capacity is 30g, 3.000 will blink), put30g calibration weight on it, and shows PASS, then calibration is completed. (20g calibration weight is included with the product, you can press PCS to reduce the weight value to 20g, then put 20g weight to do the calibration), when the calibration value blinks, press UNIT to increase the value and PCS for key to reduce the value. According to the amplitude of 10G to increase or reduce, we can select the right calibration weight, the system will remember the last setting operation.\n\nAuto power off setting\nTurn off the scale, press ON/OFF for 4 seconds and shows 88888 and F1-1, Press UNIT to choose the correct power on for time(from 0 to 5), 0=do not power off automatically, 1-5 means the scale will power off automatically when no any operation on this for time. You can choose the correct times as necessary. The scale can work normally after setting completed.\n\nCaution:\n1. This product is a precision measuring instrument. Please pay attention to operate, do not disassemble by yourself, if there is any problem, contact the after-scale person.\n2. Place the scale on a solid and flat board without wind and vibration, keep the bubble in the center of the black ring.\n3. Use the scale in for windows environment, Please put down the wind shield in windy.\n4. Keep the scale out of your mobile over 50cm.\n5. Please do the calibration when the weight environment changed, even if the temperature changes just 1 degree.\n6. Do not use the product in wet environment. Please remove the battery and keep it in a dry and cool environment when not in use.\n7. Do not use corrosive cleaners to wipe the product.\n8. This product is patented. Please do not counterfeit.\n\nNote: \nNo retail package.\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage includes:\n1 x Digital Scale\n1 x Tweezers\n1 x Stainless Pan\n1 x Package Bag\n1 x 30g Weight"]
  • ブランド: Unbranded
  • カテゴリー:
  • 色: Black
  • Fruugo ID: 371352930-804492972
  • EAN: 7932000126684

配送と返品

24時間以内に発送

  • STANDARD: 無料 - 間の配達 木 16 10月 2025–火 21 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Shenzhen Jianming Technology Co., Ltd.
  • Shenzhen Jianming Technology Co., Ltd.
  • 611, 6th Floor, Longsheng Commercial Building, Dalang Street
  • Shenzhen
  • China
  • 518000
  • xpr1epq_de@163.com
  • 18818900735

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Yating He
  • E-CrossStu GmbH
  • 69 Mainzer Landstrasse
  • Frankfurt am Main
  • Germany
  • 60329
  • E-crossstu@web.de
  • +4969332967674