Specification Parameters - Product weight: 50 ± 10 grams - Product dimensions: 6.2×3×2.7 cm - Product color: Black - Product material: Plastic + Metal Features 1. Insert the shaft of the cue with a new tip vertically into the hole of the hob, and turn it clockwise to repair the edge of the tip, and cut and plane the tip. 2. Thick steel blade, durable. 3. Insert the shaft vertically into the arc former and rotate it freely to grind the tip into a circle. 4. Flat grinding can grind the residual glue on the cue tip and the uneven part at the bottom of the new tip. 5. Eight - in - one function, every detail is full of surprises: - Cue tip cleaning: When changing the cue tip, rotate the cue to remove the residue on the tip. - Rounding: Insert the cue vertically into the arc former and rotate it freely to make the tip round. - Flat grinding: Grind the glue residue at the corner of the shaft tip and the uneven part at the bottom of the new tip. - U - shaped grinding: The steel U - shaped grinding disc can be used to carefully grind the tip to achieve a curve suitable for personal use. - Edge compaction: Rub the tip in the groove to increase the hardness of the edge. - Trimming: Insert the shaft of the new tip vertically into the hole of the reel and turn it clockwise to repair the edge of the tip. - Tip shaping: Lean the cue against the hole at an angle and rotate it gently to shape various curves. - Needling: Prick the tip with a sharp thin piece to reduce the hardness of the tip; if the top of the tip is too slippery, it can also increase the surface roughness. Packaging Contents 1 cue tip shaper