For Keeway Superlight Limited 125 All Years TXM Motard 125 Motorcycle Gear Indicator 1-6 Level Digital Equipment Meter -- Note: The product has a version with mounting bracket and a version without mounting bracket. Please choose the product that suits you according to the actual situation. Please note that for cosmetic products, products with mounting brackets do not have the word "gear" on the top of the surface. Features: Condition: 100% Brand New Light Color: Red/Blue/Green 1-6 Level IP68 Waterproof Gear Display Fitment: For Keeway Superlight Limited 125 by All Years For Keeway TXM Motard 125 All Years Installation: You need to connect 4 wires to your bike's wiring harness. Good quality quick connectors (4pcs taps) are supplied. There is no need to cut any wires and there is no need for soldering. All connections can be made under the fuel tank, in the ECU box or behind the instrument cluster. The table below shows an overview of the connections: To complete the installation, it is recommended to consult your dealer and/or read the manual service available for your bike. Due to the large number of bike and vehicle models compatible with this kit, model-specific wire colors and installation instructions are not described in this document. Setup: You must configure the module after installation. When the ignition is turned on, the display counts backwards (6 to 1), indicating that the memory is clear. - Lift the rear wheel off the ground with a stand and start the engine in neutral. (If you don't have a stand, you can set the device while driving. Find a long, straight road with light traffic.) - The display will flash "1". Select first gear, release the clutch and keep the rpm above idle speed. The display will flash faster as the device learns gear. -When the display shows "2", select the two-position. Repeat this process until all gears have been selected (5 or 6). The device is programmed and should indicate the gears correctly. Now, when the ignition is turned on, the display counts towards front (from 1 to 6) That it is fully functional.