Designed to be easy to use, this product helps to repair scratches on the surface of your car, brighten your paint and give your car a new look.As a practical car or home essential tool, it can quickly fill scratches on car surfaces, with fast curing and easy sanding.Made from resin, surfactant and waterborne pigment, and it has a good repair effect.The length of the product is 11.5 cm, the width is 3 cm, the height is 1.5 cm.It is used for car body scratch care. Item Name: Car Body PuttyMaterial: Resin,Surfactant,Waterborne PigmentNet Content: 20g Shelf Life: 6 Months Features: Convenient, Easy to Use, Quick Dry Instructions:1. Basic Processing:First use 320# sandpaper to polish the dents and scratches, the grinding area must be slightly larger than the dents or scratches, and then wipe off the dust with a clean cloth.2. Filling Soil:Squeeze out an appropriate amount of filling soil, scrape it with a small scraper, the filling soil should be a thin layer, not thick, it may not dry if it is thick. Due to the fast curing and drying of the filling soil, do not use the scraper to scrape it repeatedly to avoid the coating from fluffing, cracking and falling off. Filling soil is only suitable for scratches and sandpaper below 0.5 mm. If it is larger, please fill it with putty and sand it, and then use filling soil.3. Grinding:After about 1 hour, use 400#-1000# second paper dipped in water to smooth it. When there are still bubbles or small scratches after grinding, repeat the operation steps 2-3 times. After finishing the fine grinding, use 2000# sandpaper dipped in water to smooth the repaired part as a whole.4. Finished Grinding:For topcoat finishing, use 2000# sandpaper dipped in water to polish the repaired place as a whole. Package Includes:3pcs * Car Body Putty