Features: 1.The clutch alignment tool can quickly and easily complete the alignment of the clutch and pressure plate before installation. 2.Allowe to manually fix (centralized) and apply the clutch plate to the pressure plate of cars and trucks during installation. 3.The clutch alignment adopts high?quality aluminium alloy materials with durable and stable performance. 4.The operation is very simple with perfect solution to your problem, save your time and avoid frustration. 5.Small and delicate, but powerful and heavy duty. Easy to carry, not subject to the constraints of time and place. Specification: Item Type: Clutch Alignment Tool_x000D_ Material: Aluminium Alloy_x000D_ Fitment: Universal_x000D_ Length of Sleeve Anchor: Approx. 5.48cm/2.2in_x000D_ Length of Pillar Sleeve: Approx. 12.96cm/5.1in_x000D_ How to Use:_x000D_ Step 1: Place the clutch plate above the pressure plate on the workbench, insert the tool into the center and push it down._x000D_ Step 2: Compress the small wheel to expand the caliper in the clutch plate._x000D_ Step 3: Squeeze the funnel wheel until it touches the pressure plate and rotate the two pressure plates._x000D_ Step 4: Align the two plates by sliding sideways until the two edges are parallel, and then tighten the funnel shaft to fix the two plates together._x000D_ Step 5: Install both boards on the flywheel, then loosen the small wheel to remove the tool. PackageList: 2 x Sleeve Anchor 1 x Pillar Sleeve