This switch is the perfect solution for setting turn signals on early street pole projects.<br> Simply clamp the steering column without drilling or cutting!<br> Die casting and chrome plating.<br> It is a 7-wire design that includes a wiring diagram.<br> These apply to many early street poles.<br> Installation Notes:<br> 1. Insert the clip into the narrow space between the signal switch housing and the strap support.<br> 2. Wrap the clamp around the desired position on the steering column.<br> 3. Engage the ends of the clip and tighten the screws until the switch is securely held correct.<br> 4. Scratch a small piece of paint from the steering column to ensure a good grounding The clamp is in a position that allows metal contact.<br> Switch type: turn signal switch<br> Equipment: Universal for FORD, BUICK, GM and other vehicles<br> Exchange part number: P111-HL101-2PIN<br> Voltage: 12V<br> OEM replacement: HL101<br> Cable length: 60cm / 23.4 inches<br> For Universal Ford, Buick, General Motors and other vehicles.<br> Colour: silver<br> Material: metal + plastic<br> Package Contents:<br> 1 * Turn Signal Switch<br> Only the above package content, other products are not included.<br> Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.