Cable Puller Cable Cutting Tool Horizontal Tool For Telecom Equipment For Multiple Core Sheaths For Wire Installation

¥9,290
+ 配送料¥1,099

Cable Puller Cable Cutting Tool Horizontal Tool For Telecom Equipment For Multiple Core Sheaths For Wire Installation

  • ブランド: Unbranded

Cable Puller Cable Cutting Tool Horizontal Tool For Telecom Equipment For Multiple Core Sheaths For Wire Installation

  • ブランド: Unbranded
希望小売価格: ¥10,190
価格: ¥9,290
得する金額: ¥900 (8%)
販売元:
¥9,290
+ 配送料¥1,099

在庫あり

以下の支払い方法を利用することができます

説明

Cable Puller Cable Cutting Tool Horizontal Tool For Telecom Equipment For Multiple Core Sheaths For Wire Installation Feature:1. Made of hard alloy steel and tool steel materials, with anodized aluminum steel structure, the drum-shaped cable pusher can ensure the stability of the cable during the removal process, easy to operate along the cable direction2. Adjustable blade, the angle can be rotated 90 degrees, equipped with pulleys, longitudinal stripping along the wire direction, labor-saving and stable operation3. The tool is designed with a finely adjustable blade to avoid damage to the fiber. Adjustable outer peeling diameter from 4-10mm, cutting depth 5.5mm. Suitable for different cable thicknesses. The tool can be replaced with a blade4. The design of the tool is suitable for many core or armored cables. The main purpose is to cut the outer sheath of the cable to obtain an internal optical cable. It is used to install wires in network and telecommunications equipment5. The cable cutting tool is equipped with a comfortable handle, ergonomic handle, easy to operateSpecification:Item Type: Cable Cutting ToolSpecification: Approx. 4 - 10mm / 0.2 - 0.4in Material: Hard Stainless Steel Alloy + Tool Steel, Anodized Steel Structure AluminumNumber of Cutting Heads: Single ShadeProduct Size: Approx. 131x74x26mm / 5.2x2.9 x 1inCutting Depth: le; approx. 5.5mm / 0.2inModel cable diameter ranges corresponding to the colors of the guide wheels:Gold: approx. 8 - 28.6mm / 0.3 - 1.1inRed: approx. 4 - 10mm / 0.2 - 0.4inA. Determine the cable structure.1. Multiple core optical cable structure can have solid inner adjacent jacket and outer adjacent armor jacket. To avoid damage to the tool, first determine the cable structure.B. Set the cutting head.1. The cutting blade of the bookbinding knife is equipped with a retractable function. When the sample cable is placed in the bookbinding knife, the depth of the blade can be set. There is a groove at the bottom of the knob A, and the blade can be adjusted by turning the upper screw in height. There are 10 divisions at the bottom of the knob. The height of the cutting head adjustable with one turn is 1mm. In turn each scale is equal to 0.1mm. When the distance between the cutting heads is adjustable, the utility knife will have a "lock" on the cable. The "live" sound can avoid damage to the internal structure of the cable caused by the cutting head being too deep.C. Pocket knife operation: according to steps 1-6, it can be used for internal and external structures with relatively high strength. (longitudinal cut)1. Loosen the black nut "A" and rotate the blade to move it longitudinally. (as shown in the figure, the blade cuts radially)2. Insert the cable into the loose tool and adjust the yellow finger knob "B" to the corresponding position.3. Tighten the black thumb nut until the blade can cut the cable longitudinally.4. Remove the cable cover longitudinally when pulling the tool. If it is used for a rigid cable jacket with a "lay", you can slightly rotate the blade to adjust it according to the hardness of the cable.5. Loosen the black finger nut, then rotate the tool 180° around the cable and re-tighten the black knob for the second longitudinal cut.6. Use diagonal pliers or a screwdriver to separate and cut the cable you cut.7. If you want to cut the cables with a stronger sheath, stop at step 6.8. The following additional steps are suitable for cutting cables with stronger sheaths. (cutting optical cable)9. For cutting the optical cable, the longitudinal cutting of the center of the optical cable jacket can be carried out, and the tool can be moved to a certain position.10. Loosen the black finger nut "A", rotate the blade 90° to set the radial cut, and re-tighten the black knob to set the blade depth.11. Rotate the tool around the optical cable to cut.12. The cable was pulled out and then cut. Package List:1 x Cable Cutting ToolNote:Disclaimer This wire stripper knife can not be used on electrified cable, it does not have anti-shock function! The stripper complies with OSHA/ANSI standards and is recognized by the industry as protective. This tool cannot be used in situations other than those specified in this manual. Please read and understand the contents of the manual thoroughly before use. 1) we accept Alipay, West Union, TT. All major credit cards are accepted through the payment processor's secure escrow. 2) Payment must be made within 3 days of placing the order. 3) If you can't check out immediately after the auction ends, please wait a few minutes and try again, payments should be completed within 3 days. About Shipping 1.
  • Fruugo ID: 397938228-848446756
  • EAN: 6935170168981

配送と返品

5日間以内に発送

  • STANDARD: ¥1,099 - 間の配達 金 03 10月 2025–金 17 10月 2025

オランダより発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com