1,High Quality: the high impact plastic construction of the housing resists damage for years to come. 2,Foldable Design: golf cart side can be folded to prevent from damage for long-term use, a good for your golf cart, suitable for most golf cart, such as Club Car, , carts. 3,More Safety: Golf cart universal side -real glass lens of the mirror, give you non-distorted and ultra clear images, helping to reduce blind spots and your driving safety. 4,To make your driving , we've increased the size ofcart to make that they can a wider vision . So that they are more practical and aesthetically pleasing than most cart on the market. Name: Golf Rearview Mirror Applicable models: golf cart As the picture showed, first you should put the flat screw through the hole larger iron sheet and the small hole of the mirror holder,and prepare a nut as a tool for use. Then punch two holes as big as screws with an electric drill or other tool that can drill, push the flat screw through the hole and take out the nuts prepared. Finally, put the nut into the flat screw and it firmly,at this point, the installation is complete . it is difficult to screw the nut in by hand, so you need the help of pliers. The second installation tool set is for solid objects: You need to prepare a pointed screw and a smaller iron sheet. It's also a fixed set ofcombinations. As the picture showed,You need to put the point screw through the small iron sheet, notice that the smaller iron sheet is in front of the mirror. Not behind. And then drill the pointed screw into the cart holder and hold it firmly. In , the mirror is fixed to the object, and the installation is complete. you need to check whether the mirror is loose to avoid affecting the driving experience. Colour:black Material:plastic+glass Package Contents: 2 x side mirror With screws Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.