Model Number: SATA Expansion Card<br> Interface: PCI<br> 1. Supports 6-port 6.0 Gbps SATA III interface<br> 2. Output balance control and auto calibration impedance for SATA III PHY.<br> 3. supports asynchronous recovery signal.<br> 4. supports spread spect overclocking.<br> 5. Supports partial / slumber power saving mode.<br> 6. Speed negotiation automatically.<br> 7. supports BIST and loopback mode.<br> 8. Supports staggered spin-up (Optional).<br> 9. Supports Hot-Plug.<br> 10. supports asynchronous notification.<br> 11. Supports ATAPI units.<br> 12. Supports base-based command and FIS-based switch.<br> Interface: SATA 7PIN<br> Support Systems: WINXP, WIN7, WIN8, WIN10<br> Connection mode: plug into the power supply and SATA SATA line in to the motherboard or expansion card.<br> Hot Tips:<br> 1. This card extension should support the PM (SATA PORTABLE MULTIPLICATOR) function of the board or the extension board to recognize 5 hard drives.<br> 2. The main SATA motherboard does not support this function. If it is not supported, only one card can be recognized.<br> 3. You must connect the SATA or DC2.5 power supply to the expansion card.<br> note:<br> Please wait slight size differs due to manual measurement.<br> Due to different display and different light, the image can not show the actual color of the item. Thank you for your understanding.<br> Colour:Blue<br> Material:Metal & PC<br> Package Contents:<br> 1 * SATA Expansion Card<br> 1 * USB-DC Power Cable<br> 1 * SATA Cable<br> Only the above package content, other products are not included.<br> Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.