<ul> <li>This item is an IDE 1 to 6 hub adapter</li> <li>Designed for 12V 4-Pin fans, it supports 6-channel 4-Pin fans to start at the same time, which solves the problem of insufficient motherboard fan ports</li> <li>Widely used in PC computer water cooling systems. Support PWM function fan automatic speed regulation. The PWM interface is connected to the CPU FAN interface on the motherboard through a PWM cable</li> <li>The orange ports are dedicated ports for the CPU fan, and these black ports are regular PWM fan ports</li> <li>EVA double-sided tape can be used to fix the wheel hub in the chassis. It is also not necessary to tear off the adhesive paper, with a built-in magnetism on the back, which can be attached to a flat metal chassis</li> <li>It can supply power to the fan and 5V 3-pin RGB products at the same time</li> <li>Equipped with 2 connecting wires, the length is about 50 cm</li> </ul> <p><strong>Specifications:</strong></p> <ul> <li>Power interface: SATA interface, large 4D interface (optional)</li> <li>Cable length: about 50 cm/19.69 inches</li> <li>RGB extension cord light interface: 8 (4Pin ARGB)</li> <li>Fan port: 8 (small 4Pin)</li> <li>Rated voltage: 12V 5V</li> <li>Weight: 45g</li> <li>Material: ABS</li> </ul>