The moisture meter can quickly measure the moisture content of the grain.1. Use high quality plastic, durable, easy to use, fast and convenient filling.2. Precise unique designs, easy to operate, effectively reduce waste.3. High precision, less powder leakage, automatic stacking speed is high.4. Simulation of automatic mechanical system, can quickly arrange capsule cover and capsule body, more convenient to use, improve capsule filling efficiency.5. Effectively solve the capsule filling problem, such as small batch processing, production, selfmade capsule.Specification:Item Type: Capsule FillerMaterial: plastic;Optional type: with powder block plate, without powder block plateSize: Approx. 16,5 x 16,5 x 6,5 cm 6,5 x 6,5 x 2,6 inchesPurpose: Used for 2# empty capsule powder filling (the capsule can be filled normally if the capsule is slightly deformed)The new type of semiautomatic precision capsule filling plate is made of cast and ABS forming, which is more precise than the acrylic plate made of manual drilling and adhesive paste on the market. More durable and beautiful designs, arc processing around the product, convenient operation. Bright color, good strength, thick material; Precise size,easy to use, fast and convenient filling, even charging;Imitating automatic machine layout designs, the capsule stacking speed is fast,the speed of automatic laying is high;Great nonmechanical capsule filling tool,with high automatic layout of the whole board, powder for filling the whole board,blocking the whole board, high efficiency and high qualified capsule speed.List of packages:1 x Stacking Board 1 x Cover Plate 1 x Body Plate 1 x Center Plate 1 x Powder Scraper1 x Powder Ironing Board1 x Handle 1 x Powder Block BoardUse:1. Place the stacking plate on the cover plate.2. Put on the right amount of capsule cover3. Shake to allow the capsule mouth to sink up into the opening of the capsule plate.4. Pour out the excess capsule cap.5. Remove the retainer plate.6. Cover the middle plate on the cover plate upwards.7. Place the tray on the body plate.8. Insert the correct amount of capsule body and shake so that the capsule mouth falls upwards into the hole in the capsule plate.9. Pour out the excess capsule and remove the tray.10. Pour the powder onto the body board and scrape it back and forth with a scraper.11. Flip the overlapping middle cover plate to cover the body plate.12. Press firmly with both hands to lock the capsule.13. Then remove the cover.14. Remove the middle plate, now the filled capsules are on the middle plate.15. Gently tap the middle plate to make the capsule fall out.16. Fill the container to finish filling the capsules.