LCD Screen and Digitizer for Samsung Galaxy A10 A105G (Black) Fully Assembled Pre-Installation Notes 1. Tip 1: Test before installation Do not remove any protective film or label when testing. Please pay attention to static electricity issues. Before attempting any repair, always use an ESD (electrostatic discharge) strap to ground yourself. This will prevent static electricity from damaging the electronic components inside the phone. Make sure to wear goggles and be careful not to cut your fingers by glass shards. 2. Tip 2: Simulation Test Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means take the phone apart, (motherboard + LCD or screen) connect audio cable and new replacement, power on, test done. If the test is OK, please install it. If it can't display, please contact us at the first time. Do not force it to install in the phone. We are not responsible once the screen is installed. 3. Tip 3: Do not over-bend the cable Make sure the LCD cable does not over-bend. Bending more than 90 degrees will cause the display to turn black. About the product 1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A10. 2. Replace broken or unusable items with new ones. 3. Make your device look fresher than ever. 4. Fits perfectly and works properly. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.