Description: A smart temperature control chip is used in this handle grip cover, featuring three levels of temperature adjustment and fast heating, which can be adjusted to suit your needs. It is convenient to install this handle grip cover by means of fastener tape, and its IP67 waterproof rating, abrasion resistance and heat resistance make it have a long service life. It is made of high-quality composite fiber yarn and wear-resistant cloth material. The length of the product is 12.8 cm, the width is 10 cm, the thickness is 0.3 cm. It is suitable for motorbike, motorcycle, ATV, and so on. Item Name: Handlebar Grip Material: Composite Fiber Yarn, Wear-resistant Cloth Features: Fast Heating, Intelligent, Three Gears Input Voltage: DC12V Operating Temperature: -30 to 100 Degrees Celsius Product Power: High-gear: 20W; Mid-gear: 15W; Low-gear: 10W Size Details: Heated Grip Cover Size: 12.8cm x 10cm x 0.3cm/5.04" x 3.94" x 0.12" (Approx.) Cable Length(from Heated Pad to Switch): 108cm/42.52" (Approx.), Length(from Switch to Electric Door Lock): 146cm/57.48" (Approx.) Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Wiring Method: The red wire is connected to the positive pole, and the black wire is connected to the negative pole. (If the wires are reversed, the product will not light up, only heat.) Operation Instructions: Power On: The red light, blue light and green light flash once each and then goes out. Standby: The red light is breathing and flashing, and the temperature reaches the relative temperature and the product automatically turns into a blue light. Working Status: The indicator light is always on (High-gear: red light is always on; Mid-gear: blue light is always on; Low-gear: green light is always on). Click the Open/Off Button: To switch gears. Noted that the positive and negative poles are reversed, the switch cannot be used, and the heating element directly heats up. Pay Attention: 1. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, when the temperature of the electric heating handle cannot be sensed in time and accurately due to the stiffness and numbness of the hand, please use the low or medium gear first to prevent high temperature burns. 2. This product is only suitable for motorcycles with 12V battery. Please read the installation diagram carefully before installation. Wrong wiring will cause damage to the components. 3. This product can only be installed on the handlebar of the motorcycle and used with electricity. Before installation, you can use the battery to test whether the product is correctly energized. 4. It is strictly forbidden to work with electricity (empty burning) when not riding, in order to prevent the temperature of the electric handle grip from being too high and damage the original handlebar. 5. It is recommended to connect the electric door lock wire for wiring. Most models are black positive and green negative. It is recommended to use a multimeter to measure the specific situation. Package Includes: 1 x Handlebar Grip 1 x Adhesive Tape 5 x Cable Ties 1 x Stainless Steel L Bracket