Intelligent Temperature Controller: Temperature range: -40? to 120?, temperature control accuracy: ±1%. The thermostat outlet can automatically switch between heating and cooling modes, controlling them by setting the start and stop temperatures. Various Functions: The LCD screen displays the temperature control mode and 4 timer settings (F01-F04). Features include temperature correction, screen saver, and storage function (all current settings are saved upon power loss). Intelligent Timer Control: This thermostat outlet detects temperature, allows setting of on/off temperatures, and offers cycle timing, on-time setting, off-time setting, and time switching. Time Range: 0-99 hours and 59 minutes, with time accuracy up to 10 minutes. Maximum Load: 16A (2), 3680W. 1.8m Temperature Probe: The thermostat outlet includes a 1.8m cable temperature sensor for connection to the measurement point, with a temperature detection range of -40? to +120?. Multiple Applications: The digital temperature control outlet intelligently manages both temperature and time. It's widely used for household wall heaters, greenhouses, aquariums, coal crystal heaters, thermostat switches, portable air conditioners, and aquaculture intelligent control. Specification: 1. Rated Voltage: 230VAC 50HZ 2. Rated Load: MAX 16A 3680W 3. Temperature Range: -40 ~ 120℃ 4. Temperature Control Error: ± 1% 5. Temperature Display Resolution: 0.1℃ 6. Time Setting Error: MAX 10 minutes F01: Cycle Timing Setting Mode Press the "MODE" button to switch to F01. Press the "SET" button to set the ON value (start hour/minute) and OFF value (stop hour/minute). The ON value is the system working time, and the OFF value is the system shutdown time. This mode controls intermittent system operation. F02: Synchronous Mode Activated Press the "MODE" button to switch to F02. Press the "SET" button to set hours/minutes. In this mode, the system is controlled to operate at the specified time. For example, if CD ON is set to 30 minutes, a countdown begins, and the system starts automatically after 30 minutes. F03: Timer Mode Press the "MODE" button to switch to F03. Press the "SET" button to set hours/minutes. In this mode, the system is controlled to shut down at the specified time. For example, if CD OFF is set to 30 minutes, a countdown begins, and the system shuts down automatically after 30 minutes. F04: Timer On/Off Mode Press the "MODE" button to switch to F04. Press the "SET" button to set the CD ON value (hour/minute) and CD OFF value (hour/minute). In this mode, the system is controlled to start and stop at the set time. For example, if CD ON is set to 30 minutes and CD OFF to 40 minutes, the system will start working after 30 minutes, and then stop working after 40 minutes. Delivery Quantity: 1 piece