Cigar Hole Punch, 1 Piece, Cigar Cutter Drill directly into the cap and take out; the drill is suitable for novice consumers of any cigar, and there are basically no unsuccessful cuts; on the other hand, the portability is very good. Well, cigar holes are usually small enough to pass through almost any airport boarding security. How to use a cigar punch 1. When using a drill cigar, always hold the cigar in one hand and the drill in the other. When opening the hole, do not insert the cigar cap directly, but press the hole slowly. Rotate to enter. If inserted directly into the cap, the sides of the cigar will be compressed, which can easily damage the wrapper. 2. When using drill holes, you only need to drill thin layers. Most cigar caps are glued around the wrapper and the middle section is actually slightly suspended rather than glued to the cigar. Drilling Slightly unscrews a small hole. 3. Come across cigars with a larger ring gauge, such as a 60-ring gauge cigar. You can make plum holes (also known as the cross hole method d). This punching method looks like four holes are punched, but actually five holes are punched. First punch a hole in the middle of the bottle cap, then press the edge of the hole, and punch four more holes symmetrically, so that the plum blossom hole punched out is very beautiful. 1. Due to different lighting and screen settings, the color of the product may be slightly different from the picture. 2. Due to different sizes, please allow slight size differences. Material: stainless steel + solid wood Size: 69*12mm, hole diameter 8mm Delivery color: as pictured Quantity shipped: 1