Shaft Flange High Strength Aluminum Alloy Clamping Flange For Robots For Engineering Equipment Feature:1. Made of high-quality aluminum alloy material, durable to use, high strength and long service time.2. It provides a damage-free clamping mechanism by using clamping methods to clamp the parts.3. This clamping method is that it does not cause any damage to the fixed parts and can produce a clamping super force on a round shaft or D-shaped shaft. The compact shape minimizes the gap diameter, so that other parts can be firmly fixed in the chassis.5. The main purpose of an axle mounting flange is to limit the axial movement of the shaft installed in the bearing or other parts. Specification:Item Type: Shaft FlangeMaterial: Aluminum Alloy Model: 4910-0816-0006Middle Hole Size: Approx. 6mm/0.2inScrew: M4 x 0.8mm/M4 x 0.03inModel: 4910-0818-0008Middle Hole Size: Approx. 8mm/0.3inScrew: M4 x 0.5mm/M4 x 0.02inApplication: Axle Fixing Flange, suitable for robots, engineering equipment, etc. Packing List:5 x Shaft FlangeNote:When the bushing needs to be used with the bearing, a separate seal should be installed between the bearing and the fixed axle flange (the diameter of the seal should be the same as the diameter of the inner flange of the bearing, not greater than the diameter of the inner flange) To prevent the flange from being used at the same time, please use with the outer flange and the inner flange of the bearing, to create a lot of friction. 1) we accept Alipay, West Union, TT. All major credit cards are accepted through the payment processor's secure escrow. 2) Payment must be made within 3 days of placing the order. 3) If you can't check out immediately after the auction ends, please wait a few minutes and try again, payments should be completed within 3 days. About Shipping 1.