high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. BLIKA cable railing swage lag screws perfect for planning your DIY cable railing project, staircases, balconies and decking areas. Thread Length = 2inch, Thread Diameter = 1/4inch, Hole Size = 1/8inch, Overall Length = 4inch, Hole Depth = 1.57inch, Pull Out= 580kg. Cable railing swage lag screws fit for 1/8 Inch stainless steel cable. Cable railing kits is made of stainless steel T316 marine grade. High tensile strength and anti-fatigue strength weatherproof, super strong resistance to rust and corrosion which make our balustrade hardware suitable for coastal installations. BLIKA cable railing system requires hardly any maintenance. The cable railing lag screw has a pull out strength of 580kg. Cable Railing lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections when using timber posts. It is recommended you use two people for installation of this system. Hydraulic Crimper Tool & Cable Cutter 50 x Swage lag screws left+ 50 x Swage lag screws right + 1 x Cable Railing Wrench+ 2 Free Drill Bit. Material: Stainless steel colour: silver Package Contents: 1 * set stainless steel wire Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.