説明
Description
This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 2A, allowing for a holding torque of 45Ncm(63.7oz.in). This stepper motor is for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. The motors are supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print!
Electrical Specification:
- Manufacturer Part Number: 17HS16-2004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg.
- Holding Torque: 45Ncm(63.7oz.in)
- Rated Current/phase: 2A
- Phase Resistance: 1.1ohms
- Inductance: 2.6mH+/-20%(1KHz)
Physical Specification:
- Frame Size: 42 x 42mm
- Body Length: 40mm
- Shaft Diameter: 5mm
- Shaft Length: 23mm
- D-cut Length: 21mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 310g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.Package listing: 1 * Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
-
Fruugo ID:
409524672-867226852
-
EAN:
5313337021187
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Choking Hazard- Small parts. To be used under the direct supervision of an adult. This item does not provide protection.