STAINLESS STEEL PLATE WITH NUMBER FOR THE HOUSE PRINTIMA Aluminium plate with address Size 32 21 0.03 cm Mounting distances 1.9 3.0cm Drilled holes for distances __________________ Durable plate made of composite board. Used to make signs, boards and information boards. Resistance to all weather phenomena, as well as long service life. Why not stal and composite board? Does not rust, Does not fade under the influence of the sun, The board retains its original appearance for many years. __________________ What are the disadvantages of steel plates? They corrode, some of them are powder coated, despite this, even during a slight scratch, rust is formed in the same place. Steel plates are heavier which requires making larger holes in the facade to mount them stably __________________ PATTERNS TO CHOOSE FROM AT THE END OF THE OFFER DESCRIPTION __________________ REMEMBER TO PROVIDE US WITH THE DATA TO BE APPLIED TO THE PLAQUE. PROPERTIES The mechanically durable plate is resistant to deformation. The product is easy to process – a thanks to low moisture absorption or heavy rains DO NOT cause swelling of the plate. The front and bottom of the plate – is made of durable aluminium. While inside – the board is reinforced with hard material PCV The set includes – Spacers and mounting pins for mounting the plate. Can be installed in many places – m.in Wire fence, wall / facade or side entrance door The pattern, is applied to the board using UV Print technology. Ensuring high quality of printing and its durability, as well as beautiful color reproduction, TECHNICAL PARAMETERS Height: 32 cm Depth: 0,03 cm Width: 21 cm _________________________________________ Specification Stainless composite board Resistance to weather conditions Indoor and outdoor installation Colour anthracite (RAL 7016 white font and decorations) Pattern with your address (And other data indicated by you) The plate is made of hard polyethylene core _________________________________________ Polish product By choosing Polish products, you support the Polish economy. for products manufactured in Poland, by companies with Polish capital – from every zloty spent on such a product to the domestic economy will return as much as 79 groszy However, for products fully foreign, and only sold in our country, from every zloty intended for their purchase will remain in Poland only 25 groszy _________________________________________ " ma to be part of the address We insist on the use of Polish characters: a, ć, ę, ł, ń, ó, ś, ź, ż, when providing the address that ma to appear on the plaque. PLATE MOUNTING Check if there are holes for distances drilled on your plate. Mark on the same surface the places where you will have to drill holes. Drill holes of appropriate diameter and depth. Put the dowels in there. Screw the rear mounting distance elements to them. Apply the plate to them and tighten it with screws from the mounting distances. READY! DISTANCES 1.9 x 3.0 cm Distances are made of excellent quality aluminum, ensuring long durability and reliability. Silicone pads which are part of one set, protect the plates from scratches. MOUNTING PINS (SLEEVE SCREW) Ideal for use in the installation of flat elements, such as aluminum plates or wooden elements. The increased diameter of the head ensures better pressure of the mounted elements, and the thickening under its base guarantees a secure installation and eliminates damage to the screw during driving. Handle: polypropylene Screw: stal galvanized Dimension: 5x45 Diameter drilling dc [mm]: 5 Minimum anchorage depth of body h min [mm]: 30 Minimum depth of mounting hole ho min [mm]: 40 _________________________________________ ENSURE VISIBILITY OF YOUR BUILDING The obligation to place a plaque with a serial number belongs to the owners of built-up real estate or other persons who own such real estate, and are visible in the land and buildings register. On the plaque in towns with streets, squares, housing estates, in addition to the order number, the name of the street, square or housing estate is also placed. In towns without streets, squares, settlements, in addition to the order number, the name of the town is placed. The plaque with the order number should be placed in a visible place on the front wall of the building. In the event that the building is located in the depths of the fenced property, a plaque with the order number is also placed on the fence. The above-mentioned information results from legal regulations, i.e. art.47b paragraphs 1, 2 and 4 of the Act of 17 maja 1989. Geodetic and cartographic law (consolidated text Journal of Laws No. U. from 2017. , poz 2101 from late. died ). _________________________________________ CUSTOMIZABLE DESIGNS TO CHOOSE FROM: