Product size: 135*165*50mm ABS foam net: soft foam and aerobic pleasure, long-term use is not easy to block, easy to disassemble and clean Ceramic coil is durable and highly wear-resistant Thickened custom handle, ergonomic design is more comfortable to use Exquisite thickened base, stainless steel thickened aluminum base for healthy water Surface matte painting, high temperature resistance and wear resistance 6-step installation 1. Put the white seal and the black rubber ring on the pipe teeth, and the pipe passes through the fixing nut and the pipe teeth. 2. Thread the 2 tubes through the hole in the sink, from bottom to top. 3. Screw the 2 tubes into the faucet On the front of the faucet, screw the left hole in red and screw the right hole in blue. 4. Insert the O-ring into the groove at the bottom of the faucet, then screw the hose ends into the bottom of the faucet. 5. Adjust the faucet position and tighten the fixing nut and tube teeth at the bottom. 6. Finally, use the wrench to connect the two pipes to the hot and cold angle valves respectively, and they are ready to use.