1、High Efficiency: This water transfer pump adopts a copper core motor with full power. The pump runs 2860 revolutions per minute and the maximum flow is 5m³ per hour. 2、Stainless Steel Material: This water transfer pump is made of 304 stainless steel meterial, which is safe and healthy, rust proof and corrosion resistant. 3、Firm: The pump has a fixed base with high hardness at the bottom. The installation hole is designed to facilitate the pump to be fixed on the ground and wall. 4、Fast Heat Dissipation: The pump is equipped with a heat dissipation wind wheel, which can efficiently dissipate heat and improve the working durability of the motor. 5、Wide Application: This jet pump is applicable to all kinds of water pressurization, high rise water supply pressurization, solar pressurization, water heater pressurization, bathroom pressurization, etc. 1 x Stainless Steel Jet Pump1 x Bottom Valve2 x Stainless Steel Adapter1 x Tape1 x Check Valve1 x Instructions Item Type: Jet pumpMaterial: Stainless steel, ABSWeight: Approx. 11400g/ 402.1ozSize: Approx. 43x21x21cm/ 16.9x 8.3x 8.3inRated Voltage: 220V, 50HZMaximum Flow: 5.5m³/ hRated Flow: 4.5m³/ hSpeed: 2860r/minPower: 1500WSuction Lift: Approx. 9m/ 354.3inMaximum Lift: Approx. 55m/ 2165.4inRated Lift: Approx. 45m/ 1771.7inCaliber: DN25, 1 inchWide Application: Water pressurization, high rise pressurization, solar pressurization, water heater pressurization, bathroom pressurization, water tower water supply pressurization