5?30V Dual MOS Tube Control Board Professional Trigger Cycle Timer Delay Switch for Smart Home

¥1,749
+ 配送料¥1,749

5?30V Dual MOS Tube Control Board Professional Trigger Cycle Timer Delay Switch for Smart Home

  • ブランド: Unbranded

5?30V Dual MOS Tube Control Board Professional Trigger Cycle Timer Delay Switch for Smart Home

  • ブランド: Unbranded
希望小売価格: ¥5,890
価格: ¥1,749
得する金額: ¥4,141 (70%)
販売元:
¥1,749
+ 配送料¥1,749

在庫あり

以下の支払い方法を利用することができます

説明

Features 1.Superior Performance: Dual MOS tube control board to achieve high frequency circuit fast and frequent on and off, unlimited switching times; on and off process does not generate noise, no electrical sparks, no electromagnetic interference. 2.High Power: Trigger cycle timer delay switch circuit board uses dual MOS parallel active output, lower internal resistance, higher current, strong power, 15A at room temperature, 400W, to meet the use of most equipment. 3.Widely Used: Dual MOS tube control board is commonly used to control motors, light bulbs, LED strips, DC motors, micro pumps, solenoid valves, etc. Through this module, you can easily control these devices, very convenient. 4.Wide Voltage, Simple Interface: Dual MOS tube control board works with wide voltage (5~30V), most devices can be used, very convenient; the interface is clear and simple, powerful and easy to understand, almost meet all your needs. 5.Stop Function, Sleep Mode: Dual MOS tube control board has a key emergency stop function (STOP key), with reverse connection protection, reverse connection does not burn; increased sleep mode, after enabling, no operation within 5 minutes, automatically turn off the display. 6.Parameter Settings: Digital time delay relay any key to wake up; can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately; all set parameters are automatically saved by power down. specificationItem Type: Dual MOS Tube Control Board_x000D_ Material: PCB_x000D_ Wide Voltage: 5-30V PackageList1 x_x000D_ _x000D_ DualMOSTubeControlBoard Note1. First determine the working mode of the relay._x000D_ 2. According to the working mode of the relay, in the main interface (when the module is powered on, the current working mode (default P1.1 mode) will flash, and then enter the main interface.) "Press and hold the SET key for 2 seconds and then release it" to enter the mode selection interface, and press the UP and DOWN keys briefly to select the mode to be set (P1.1~P?4)._x000D_ 3. After selecting the mode to be SET (for example, P3.2), press the SET key briefly to set the corresponding parameters. At this time, the parameters to be set will flash (OP on time, CL off time, LOP cycle number ("?"stands for infinite cycle)). Adjust the parameter values through UP and DOWN, and support long press (fast increase or decrease) and short press (increase or decrease by 1 unit); After setting the parameter value, press the STOP key briefly to select the decimal point position and the timing range (the corresponding time is 0.1 seconds to 999 minutes); Press the SET key briefly to set the next parameter of the current mode, and the process is the same as above._x000D_ 4. After setting the parameters of the selected mode, press and hold the SET key for 2 seconds and then release it. The currently set mode will blink, and then return to the main interface. Setting the parameters is successful, which is very simple._x000D_ Main interface: "000" (without decimal point) is displayed when the relay is not working, and decimal point is displayed when the relay is working, which is very clear._x000D_ Mode selection interface: press and hold the SET key to enter; after setting, press and hold the SET key to exit and return to the main interface.
  • Fruugo ID: 310461961-694261542
  • EAN: 9223022626213

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Do not let your children touch this product alone to avoid swallowing or other injuries.

配送と返品

3日間以内に発送

  • STANDARD: ¥1,749 - 間の配達 金 24 10月 2025–金 31 10月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • 91440300MA5HDL2A4K
  • SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
  • Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
  • Shenzhen
  • CN
  • 518102
  • 939301410@qq.com
  • 15625700418

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • 950891051
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
  • Paris
  • FR
  • 75008
  • mjcm190928@gmail.com
  • 0033 767213611