Smart Home Life: You can monitor the usage of all home appliances and remotely control and schedule control to make life smarter. 3 timing modes: timing mode / countdown mode / cycle timing, when you leave work, you can set the time to turn on the air conditioner in advance, or set other equipment. Premium material: Copper has good conductivity, PA66 flame retardant material, high temperature resistance, effectively improving the safety of use Multiple functions: set the on/off state of the device in different scenarios and remotely monitor the real-time status of electrical charging devices. Multiple Functions: Set the on/off status of the device in different scenarios and remotely monitor the real-time status of charging electrical devices. din rail double pole circuit breaker wifi circuit breaker light switch wifi remote light switch wifi din rail light switch switch How to use: Light Description: 1. The LED indicator shows a solid blue light, indicating that the switch is on. 2. The LED indicator is off, indicating that the switch is in the off or off-grid state. (In off-grid mode, the manual switch has no status indicator, ple pay attention to operation safety). 3. The LED indicator flashes blue slowly, indicating that the product is in pairing mode. Steps: 1. Connect the wire from the upper end of the circuit breaker to the lower end, make sure the wiring is correct and WiFi signal is strong. 2. Turn on the phone's Bluetooth and WiFi, open the APP, then long press the power button, wait about 5-10 seconds, the LED light will flash blue slowly. 3. After waiting for a while, the pop-up window will appear, click the + in the upper right corner, then select the Add device button and wait for the device to be recognized. 4. Enter wifi account password and click Next, and wait for network connection. 5. Connect to the network. Specification: Item Type: DIN Rail Circuit Breaker Material: Copper, PA66 Application: Smart Home Control Panel Color: Black Applicable Application: for Smart Lift Rated Working Voltage: AC 230V Control Type: Remote Control, Manual Number number of poles: 1P+N (through N pole) Control method: for SigMesh/for ZigBee Rail: DIN35 Size: approx. 82x68x18mm/3.23x2.68x0.71in Package List: 1 x DIN Rail Circuit Breaker