This gemstone testing equipment is not only a diamond tester, also a multi gemstone tester. It can detect if a gemstone is real or , including: diamond, sapphire, ruby, crystal, , jadeite, and other precious stone of sizes.If the number of lights equals or exceeds 9, and it beeps, it means the diamond is true. * If the lights is about 9 and it beeps, it means the sapphire is true. * If the number is 6.5-7, it means the is true. * If the number is 7-8 , it means the crystal is true. * If the number is 6-7, it means the jade is true. Test: 1. Put the battery in the tester. 2. the probe cap. 3. Turn on the switch. 4. Make only one light on the scale. 5. Make the " lamp" light on. 6. (If test diamond, you then need to turn on the lights number corresponding to the indoor temperature and diamond weight.). 7. (If test other gems, you'd better calibrate the probe, : by placing the probe vertically on a glass, then adjusting the light to 5, then test the gems.)Power supply: 9V Battery (The product is shipped without battery)Uses: / small switches for testing diamondsColour:BlackMaterial:PC + metalSize:16 x 4 x 2cmPackage Contents:1 * Diamond Selector1 * Testing Platform1 * Carrying Case1 * Manual1 * packing boxNOTICE: No matter what gemstone you are testing, the probe needle and the tested object must be at a angle. When testing diamond, your right finger must keep touching the metal panel on the back of the tester, while you do not Press the panel if you test other gemstones. Do Not test any metal. Do Not wear glove.