_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Features: _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ *100% newand high quality. _x000D_ _x000D_ *Double head design - Both the left and right cutter heads are threaded, and the handheld handle can be mounted at either side, with one grip and one cut. If 1 side is blunt, you can change the other side. _x000D_ _x000D_ *How to use - It should be installed on the rig for electric or pneumatic drills between 1500-3000 RPM, which is more powerful and eaier than ordinary boring tools and saws. _x000D_ _x000D_ *Widely used - The aluminium cutters application include but are not limited to: sheet metal, corrugated materials, pipes, complex profiles, powder coating materials, bakelite, plastic, fiberglass, thin metal plates. _x000D_ _x000D_ _x000D_ _x000D_ Specifications: _x000D_ _x000D_ *Material: ABS Plastic _x000D_ _x000D_ *Diameter: 17.5cm / 6.88inch _x000D_ _x000D_ *Main Color: Orange _x000D_ _x000D_ *Thickness allowed to cut: _x000D_ _x000D_ Stainless steel plate: 1.2mm _x000D_ _x000D_ Common steel plate: 1.8mm _x000D_ _x000D_ Copper, aluminum plate: 2mm _x000D_ _x000D_ Plastic, fiberboard: 2mm _x000D_ _x000D_ _x000D_ _x000D_ Operations: _x000D_ _x000D_ 1.Fasten the plate(to be cut) onto an operating platform with a minimum distance of 15 between the place and the platform. _x000D_ _x000D_ 2.Fit the tool with an electric drill or any power drill by fastening the drill chuck. _x000D_ _x000D_ 3.Operate the tool when the motor runs. _x000D_ _x000D_ 4.Release the cutting bit when the motor keeps running. _x000D_ _x000D_ 5.Use special bit-cooling oil at operation. _x000D_ _x000D_ 6.See the picture below for more information when the tool is fitted to a drill. _x000D_ _x000D_ _x000D_ _x000D_ Package Contents: _x000D_ _x000D_ 1 x Double Gead Cutter _x000D_ _x000D_ 1 x Wrench _x000D_ _x000D_ _x000D_ _x000D_ Note: _x000D_ _x000D_ 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. _x000D_ _x000D_ 2. Please allow slight manual measurement deviation for the data. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_