説明
LCD Screen with Digitizer Full Assembly
Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with glass splinters.
Tips 2: Simulated testing
Screen replacement is a very fragile product. We strongly suggest testing before installation. Please perform simulated testing, which means opening the mobile phone, connecting the motherboard, LCD or screen, o cable, and the new replacement, then powering on to complete the test. If the test is successful, proceed with installation. If there is no display, please immediately. Do not force installation. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend the cable
Please make sure the LCD cable is not over-bent. Bending beyond 90 degrees may cause a black display.
About the product
1. LCD display and touch screen digitizer assembly replacement part
2. Replace your broken or non-functional unit with a new one
3. Restore your device to a like-new appearance
4. Full compatibility and proper fit
5. Each item is tested and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible after the screen is installed
-
Fruugo ID:
436618843-915116211
-
EAN:
9068387053461
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
安全上の警告:
Not suitable for children under 36 months