Diesel Air Heater Control Board 12V 24V LCD Monitor Remote for Vehicle Truck Marine Use

¥4,449
+ 配送料¥1,799

Diesel Air Heater Control Board 12V 24V LCD Monitor Remote for Vehicle Truck Marine Use

  • ブランド: Unbranded

Diesel Air Heater Control Board 12V 24V LCD Monitor Remote for Vehicle Truck Marine Use

  • ブランド: Unbranded
希望小売価格: ¥9,790
価格: ¥4,449
得する金額: ¥5,341 (54%)
販売元:
¥4,449
+ 配送料¥1,799

在庫あり

以下の支払い方法を利用することができます

説明

Note: Due to logistics restrictions on items containing batteries, the battery has been removed from the remote control. Upon receiving the package, please purchase a CR2032/A27 3V button cell battery separately. We apologize for any inconvenience. Package Included: - 1x LCD Switch & Remote - 1x Mother Board - 1x Wire Harness - 1x Remote - 3PCS SET: 1x LCD Switch & Remote & 1x Mother Board - 5PCS SET: 1x LCD Switch & Remote & 1x Mother Board & 1x Wire Harness & 1x Temp Sensor Specifications: - Color: As shown in picture - Remote Distance: Within 10m - Voltage: 12V/24V - LCD Connector Pin: 3 Pins Triangle Plug - Remote Control: 4 Button - Battery: 1PC 27A 12V (excluded due to shipping regulations) Fitment: Compatible with 3KW, 5KW, and 8KW air diesel parking heaters. Important Notes: 1. A transparent protective film is applied on the screen. Please remove it before use. 2. If your original motherboard and controller match ours (all black connectors), you may replace only the faulty component. If they differ, both motherboard and controller must be replaced together for compatibility. 3. The remote control is designed exclusively for use with our controller and motherboard. 4. When ordering, select the 3PCS SET if you need the controller, remote, and motherboard. Selecting only the LCD Switch & Remote does not include the motherboard. Selecting only the Mother Board does not include the controller or remote. Please ensure correct selection to avoid incorrect orders. Remote Control Coding Instructions: 1. Press and hold the up button for more than 3 seconds in the off state. 2. Wait until the display shows HFR- to enter coding mode. 3. Press the up button to send the remote code. 4. The heater will turn on if the code is successful; otherwise, it will not start. 5. The coding mode exits automatically after timeout. Parameter Setting Procedure (press the setting key to enter): 1. Time Setting: Use up/down keys to adjust hour (24-hour format), minutes, and other parameters. Press enter to confirm and proceed. 2. Timer Power-On Setting: Default is off (display 1oF). Press up to turn on (display 1oN), press enter, then set hours and minutes. Countdown mode supports up to 99 hours and 59 minutes. 3. Timer Shutdown Setting: Default is off (display 2oF). Press up to turn on (display 2oN), press enter, then set hours and minutes. Countdown mode supports up to 99 hours and 59 minutes. 4. Password Input: Use up/down keys to adjust digits. Press confirm when correct. After entering all 4 digits correctly, press confirm to proceed. Incorrect input returns to first digit entry. To exit without changes, press SET until exit or wait 10 seconds. 5. Pump Oil Volume Setting: Adjust minimum oil volume using up/down keys. Press confirm to enter maximum volume setting. Adjust maximum volume and press enter to continue. 6. Fan Speed Setting: Adjust minimum fan speed using up/down keys. Press enter to enter maximum speed setting. Adjust maximum speed and press enter to proceed. 7. Working Voltage Setting: Must be set in shutdown state. Use up/down keys to select 12V (U-12) or 24V (U-24). Ensure oil pump, motor, and ignition plug are compatible before operation. 8. Speed Signal Selection: Display shows 5N-1. Use up/down keys to set. Choose 5N-2 if impeller has two magnets with same polarity. Choose 5N-1 if magnets have site polarity or only one magnet (default). Incorrect selection may double speed reading. 9. Ignition Plug Power Selection: Display shows PF-5. Use up/down buttons to set value (1=35W, 2=40W, 3=45W, 4=80W, 5=85W, 6=90W). Default is 5. Recommended to keep default unless verified otherwise. 10. Password Change: Initial display shows oF.
  • ブランド: Unbranded
  • カテゴリー: リモコン
  • サイズ: Mother Board
  • Fruugo ID: 415736423-877537079
  • EAN: 5289340445695

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Not suitable for children under 3 years. Adult supervision required

配送と返品

24時間以内に発送

  • STANDARD: ¥1,799 - 間の配達 金 03 10月 2025–月 13 10月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Qiu Jiateng
  • Wuhan Lili Xing Trading Co., Ltd
  • 9 Jian She 2nd Road, Building 6, Unit, Floor 7, No. 11 Yu Jiang Yi Pin · Qing Shan Yin, Qingshan District, Hubei
  • Wuhan
  • CN
  • 430080
  • jing4808880meif@163.com
  • 15625617190

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149