Multimeter Power ZT-703S equipped with an oscilloscope 50Mhz allows you to diagnose damage even faster, thanks to which it speeds up and facilitates work. Thanks to the built-in oscilloscope, it significantly expands the measurement capabilities contained in one device. ZT-703S will work both in service and terrain. Main features of the product: 3in1 device: multimeter, 2 channel oscilloscope 50Mhz, generator 3,5" IPS display - easy control of the device and convenient reading of measurement results Automatic measurement with one click Power supply za 18650 3.7V battery Charging za via USB-C cable Compliant with CTA III 1000V safety level, CTA II 600V oscilloscope mode Double Ceramic Fuse 200mA 10A Widely used in working with electronics Multimeter Specification: Permanent voltage (V): DC 2.5000V-1000.0V, (0,05%3), Permanent voltage (mV): DC 25.000mV-250.00mV, (0,05%3), Alternating voltage (V): AC 2.5000V-750.0V, (0,5%3), Alternating voltage (mV): AC 25.000mV-250.00mV, (0,5%3), Direct current (A): 2.5000A-10.000A, (0,5%3), Direct current (mA): 25.000mA-250.00mA, (0,5%3), Variable current (A): 2.5000A-10.000A, (0,8%3), Alternating current (mA): 25.000mA-250.00mA, (0,8%3), Resistance: 0-250.0MOhm, (1%3), Capacity: 0-99.99mF, (2,0%5), Frequency: 0-999.9kHz, (0,1%3), Sound signalling: < 30Ohm, Oscilloscope bandwidth: 50MHz, Real-time sampling rate: 280 MSa/s Temperature: -20 - 1000 Diode Tester: YES Circuit Continuity Tester: YES HOLD function: YES Specification of oscilloscope Capacity: 50Mhz Number of Channels: 2 Input: AC DC Real-time sampling rate: 280Msa/s Maximum input voltage: 300V (DCAC) Probe Settings: X1, X10 Measurement method: automatic (period, frequency, peak to peak value, maximum value, minimum value, effective value) Display: 3,5" IPS TFT 3,5" display "AUTO/RANGE" button "MENU" button Connector 10A Connector mA COM connector Connector for measuring voltage/resistance/frequency/capacity/temperature/diodes/circuit continuity Rubberized solid housing "MODE" button "HOLD/SAVE" button Rectangular signal output connector for 3V/1KHz oscilloscope USB-C connector (charging and data transmission) BNC connector for oscilloscope probe The set includes: 1x Measuring device ZT-703S (battery included) 1x Set of measuring wires 1x Oscilloscope probe 1x Thermocouple 1x USB Cable 1x Pouch