Intelligent Temperature Controller: Temperature range: -40 - 120 ℃, temperature control accuracy: ±1%. The temperature controller socket can automatically switch to heating and cooling modes and control heating/cooling equipment during operation by setting the start and stop temperature equipment. Multiple Functions: The LCD screen can display the temperature control mode and 4 time modes F01-F04. And with temperature correction function, screen lock protection, storage function (all current settings are saved after power failure). Intelligent Time Control: This thermostat socket can detect temperature, set on and off temperature, and has the functions of cycle time control, on-time, off-time, and time switching. Time range: range: 0-99 hours and 59 minutes, time accuracy: up to 10 minutes. Maximum load: 16A (2), 3680W. 1.8m Temperature Probe: The thermostat socket comes with a 1.8m cable temperature probe for connection to the measuring point, with a temperature detection range of -40 ~ +120. Multiple Uses: The digital temperature controller socket can intelligently control temperature and time. It is widely used in household wall heating and other places in greenhouses, aquariums, coal crystal heaters, thermostat switches, mobile air conditioners, and intelligent control of aquaculture. Specification: 1. Rated voltage: 230VAC 50HZ 2. Rated load: MAX 16A 3680W 3. Temperature range: -40 ~ 120 ℃ 4. Temperature control error: ±1% 5. Temperature display resolution: 0.1℃ 6. Timing error: MAX 10 minutes F01: Cycle Time Mode Press "MODE" to move to F01. Press the 'SET' button to set the ON value (start hour/minute) and OFF value (stop hour/minute). The ON value is the system's working time, and the OFF value is the system's shutdown time. This mode is cycle time, which can control the system to work intermittently. F02: Time Mode Activated Press "MODE" to move to F02. Press the 'SET' button and set hours/minutes. In this mode, the system is controlled to operate at the specified time. For example, if CD ON is set to 30 minutes, the countdown starts, and the system starts automatically after 30 minutes. F03: Timeout Mode Press the "FASHION" button to move to F03. Press the 'SET' button and set hours/minutes. In this mode, the system is controlled to shut down at the specified time. For example, if you set CD OFF to 30 minutes, the countdown starts, and the system shuts down automatically after 30 minutes. F04: Timer On/Off Mode Press "MODE" to move to F04. Press the 'SET' button and set the CD ON value (hour/minute) and CD OFF value (hour/minute). In this mode, the system is controlled to start and stop at the set time. For example, if you set CD ON to 30 minutes and CD OFF to 40 minutes, the system starts working after 30 minutes, and when the system starts working, it stops working after 40 minutes. Delivery quantity: 1 piece luckymeet