1、Advanced Technology: The circuit board uses advanced digital audio signal processing technology (DSP) and FM phase locked loop modulation technology (PLL) to make the sound quality more real, the performance more stable, and working frequency has no deviation. 2、High Quality Function: The circuit board has 30 level digital volume adjustment, which can be easily completed by key operation, automatically memorizes the data before the power failure, and the speaker and earphone output automatically switch. 3、Quartz Crystal Frequency Stabilization: The circuit board with quartz crystal frequency stabilization is adopted, and the receiving frequency will no longer drift when the temperature changes. 4、Audio DSP: The circuit board uses professional audio DSP to analyze and process the audio signal, will automatically mute when there is no signal or weak signal, etc. FM noise floor is large, and get rid of the annoying rustle of traditional FM radio when there is no signal or weak signal. 5、LCD Display: This is a radio circuit board with a more intuitive and accurate LCD display, with extremely low power consumption and minimal noise interference, and supports serial communication control, use all functions such as a computer or MCU to control the module. 6、Digital Encoder: This circuit board has an incremental digital rotaries encoder to adjust the volume and frequency, which has a good feel, accurate positioning, stable and durable, and 360° rotation without dead angles. Item Type: Digital Radio Receiver Module Material: PCB Output Power: 500mW (Driving Earphones), 3Wx2 (Driving Speakers) Frequency Response Range: 50Hz-18KHz Receiving Frequency Range: Turn off Campus Radio 87.0MHz-108.0MHz, Open Campus Radio 76.0MHz-108.0MHz Equivalent Noise: ≥30dB Supply Voltage: 3.0V-5.0V Power Supply Current: 1000mA at Maximum Volume, 60mA at Minimum Volume (for Reference Only) Channel: Stereo 1 x Radio Circuit Board