This USB-C to Dual Canon o cable converts smart devices with USB-C interfaces, such as smartphones, notebooks, and tablets, into dual Canon outputs. The red connector indicates the right channel output, while the black connector indicates the left channel output. The output end connects to XLR input ports on power amplifiers, active speakers, and stage o systems. Please note this is a one-way conversion cable: USB-C outputs o signals to XLR only. The XLR end is designed to connect to compatible input ports on amplifiers, powered speakers, and o systems, but is not compatible with microphones. The cable features a Y-shaped split design, with the split located approximately 50 cm from the XLR plug. It is equipped with a 32-bit/384-kHz DAC chip, offering higher sampling rates, improved o clarity, stronger driving capability, and a higher signal-to-noise ratio compared to standard 16-bit or 24-bit chips. Specifications: - DAC: 32-bit, 384 kHz - Dynamic Noise Reduction (DNR) @ 1 kHz, -60 dBFS (Typ): 100 dB - THD+N @ 1 kHz, 500 mVrms (Typ): -85 dB - Crosstalk @ 1 kHz, 0 dBFS (Typ): -80 dB - Dormant current: 1.5–2 mA - Standby current: 25–35 mA - Working current: 40–50 mA - Output impedance: 8–32 Ω - Output level: 530–630 mV - Frequency range: 20 Hz – 20 kHz - THD+N: -90 to -80 dB - Signal-to-noise ratio (SNR): 95–105 dB - DNR: 95–105 dB - Crosstalk: -90 to -70 dB Color: Black & Red Material: Plastic Length options: 1 meter, 2 meters, 3 meters Package Includes: 1 x o Cable Note: The product image may slightly differ in color due to lighting and screen settings. Measurement tolerance is ±1–3 cm.