Duplex Hotspot Board UHF VHF + OLED + Case Kit Support P25 DMR for Zero W 0W 2w 3B 4B

¥6,390
+ 配送料¥2,149

Duplex Hotspot Board UHF VHF + OLED + Case Kit Support P25 DMR for Zero W 0W 2w 3B 4B

  • ブランド: Unbranded

Duplex Hotspot Board UHF VHF + OLED + Case Kit Support P25 DMR for Zero W 0W 2w 3B 4B

  • ブランド: Unbranded
価格: ¥6,390
販売元:
¥6,390
+ 配送料¥2,149

在庫あり

以下の支払い方法を利用することができます

説明

Supports DMR, P-25, D-Star and System Fully tested. Onboard LED to show status (TX, RX, PTT, Mode) Mounts cleanly on all current 's including the Pi Zero W 2W/3B/4B WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System WORK with RASBERRY Pi: Mounts cleanly on current including the Pi Zero W 2W/3B/4B.Mode: Support both Duplex mode and Simplex mode Differencs in Duplex and Simplex:in Duplex mode,have 2 time slots, and Tx and Rx can do at the same time Radio Frequency : in duplex mode,support uhf 430-440MHZ, in simplex mode support both uhf 430-440MHz and vhf 140-150MHz adjusted: TX =0, RX=0,need no offset. Modem select: STM32-DVM/MMDVM_HS- Hat(GPIO) Aluminum alloy shell:High RF performace LEDs:on board leds to show status, with status words on shell How to write WiFi detail into the Hotspot: 1: Generate WiFi config file, and plug it into TF card. We need a TF reader.Put our TF card into this TF reader and plug this into our computer. Go tohttp://.pistar.uk/wifi_builder.phpand then fill your WIFI name into the SSID, password into the , click submit. Then the file "wpa_supplicant.conf" is generated. Drag this file into your TF card's boot path. And plug the card into your hotspot. Power up your hotspot, and wait for 1-2minutes.Then we go tohttp://pi-starand play with the settings. Please keep this in mind that gadget only support 2.4 Gigahertz router, and it does not work with 5.8G router. Colour:white+black Material:PCB+electronic components+aluminum alloy Package Contents: 1 x Hotspot Board 1 x Shell with mounting screws Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo ID: 348025723-760211859
  • EAN: 922025696733

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 10 years old - Adult supervision recommended
材料: Metal leather rubber

配送と返品

3日間以内に発送

  • STANDARD: ¥2,149 - 間の配達 木 23 10月 2025–金 31 10月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • shenzhenshilingchaozheshumakejiyouxiangongsi
  • shenzhenshilingchaozheshumakejiyouxiangongsi
  • guanggdongshenzhenshen zhen shi fu tian qu hua qiang bei jie dao li cun she qu zhen xing lu 39-9 hao hua fa da sha 411 dong 4 ceng 1 hao 6653
  • shenzhen
  • CN
  • 518000
  • hongfaxiangdong@163.com
  • 15903319999
  • https://www.fruugo.co.uk/shenzhen-shi-hongfa-xiangdong-keji-youxian-gongsi/m-18618

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Yating He
  • E-CrossStu GmbH
  • 69 Mainzer Landstrasse
  • Frankfurt am Main
  • DE
  • 60329
  • E-crossstu@web.de
  • 69332967674
  • https://www.fruugo.co.uk/shenzhen-shi-hongfa-xiangdong-keji-youxian-gongsi/m-18618