Item Type: LED Light Induction Kit_x000D_Product Model: LTK01_x000D_Input Voltage: DC12V/DC24V_x000D_Output Voltage: DC12V/DC24V_x000D_Output Power: Single Step 15W, Total Power: 400W_x000D_Ports: 32_x000D_Induction Head: 2 (AB)_x000D_Protection Class: IP20_x000D_Signal Mode: Human Body Induction_x000D_Control Method: Induction Control_x000D_Control Range: Approx. 30 meter / 98.4ft_x000D_Interface Type: For DuPont Interface_x000D_Applicable Scene: Home, hotel, bar_x000D__x000D__x000D_Insert the LED strips into the controller ports of the corresponding stair steps in sequence._x000D_For Example: _x000D_The lamps on the first step are directly inserted into the interface 1 corresponding to the controller; the lamps on the second step are directly inserted into the interface 2 corresponding to the controller; the lamps on the third step are directly inserted into the interface 3 corresponding to the controller; and so on_x000D_This controller has 32 ports. According to the actual situation, you can insert the required light strips in order and do not need to pay attention to the redundant ports. You can also add light strips later._x000D_Lamp Controller Interface: For DuPont interface, left +, right ?_x000D_LED Stair Light Sensor Controller Operating Instruction: _x000D_Number of Stair Steps Settings: _x000D_Press and hold the Settings 2 button for 2s, the red light flashes, and then press the Settings 1 button to select the number of stairs to set. After selecting, release the hand for 5s and the red light will turn off, and the setting is complete._x000D_Lighting Speed Setting: _x000D_Press and hold the Setting 1 button for 2s, the red light flashes, and then press the Setting 1 button to set the speed 1?5, 1 is the slowest, 5 is the fastest; The light goes out and the setting is complete._x000D_Brightness Settings: _x000D_When the LED Light is on, press the Setting 2 button to enter the 5 level brightness selection lighting delay setting: _x000D_Press and hold Setting 1 button for 3s, enter the delay settings 1?5 levels, respectively, the first level is a delay of 10s, the second level is 20s, the third level is 30s, and the fourth level is 40s, fifth level is 50s. 1SMART INDUCTION: LED step stair light induction controller kit, adopts intelligent human body induction design, the control range can reach 30 meters. 2EASY TO INSTALL: The controller has 32 interfaces, and the required light strips are inserted in sequence when using, which is easy to install and operate. 3MULTIPLE FUNCTION: With induction control, lighting speed control, brightness control and lighting delay design, with complete function and strong practicability. 4GOOD PROTECTION: The induction light controller has IP20 protection level, which has easy installation, as well as safe and reliable operation. 5SIMPLE SETTING: With 5 level brightness setting and lighting speed setting, it is widely used in home, hotel or shopping mall, etc. 1 x LED Light Induction Controller 2 x Induction Heads 2 x Coils 32 x Connectors 1 x Neutral Wire 1 x Fire Wire 1 x Sticker 4 x Screws