describe: how to use 1. Cut the cuticles, file the nails into the desired shape, and then separate them briefly. 2. Remove excess stratum corneum. 3. Gently polish the nail surface with the polished surface, and then wipe it with a cleaning pad. 4. Apply a thin layer of primer and cure under a nail lamp for 30-60 seconds. 5.2-3 Apply a thin layer of gel polish on the nails and cure under the lamp for 60 seconds 6. Seal the whole thing with top coat and harden for 60 seconds 7. Wipe off the sticky sweat layer with a cleaning pad 8. Done How to remove nail polish 1. Clean hands and nails. Use a file to gently remove the topcoat. 2. Open the makeup remover pad, put it on each nail and wrap it with the makeup remover pad. 3. Wait for 15/20 minutes. 4. Tear off the makeup remover pad and use a cuticle pusher to remove the residue How to avoid easy peeling 1. Remove the excess cuticle, trim the edges, file the nail surface completely, and make sure it is dry and clean. 2. Remember to apply a thin layer. Thinner means stronger. 3. Apply all layers, trying to reach the edge of the nail. In particular, the top coat and primer must be wrapped around the edge of the nail and the fingertips of the nail. 4. The gel curing time should not be too long or too short. (It is normal that the primer and nail polish are still a little sticky after curing, so that the adhesion between the nail and the gel layer will be better.)