About the product1. Replacement LCD screen + touch screen digitizer kit for Nokia G10 / G202. Replace damaged or unusable items with new ones3. Make your device look fresher than ever before4. Fits and works perfectly5. Each item is inspected and in good condition before shipment6. professional installation is highly recommended. We will not be responsible for the screen once it has been installed.Pre-Installation NotesTip 1: Pre-Installation Testing TestingDo not remove any protective film or labels when testing. Please be aware of static electricity problems.Always ground yourself using an ESD (Electrostatic Discharge) strip before attempting any repairs. This will prevent static electricity from damaging the electronic components inside the phone.Make sure you wear goggles and be careful not to cut your fingers on glass shards.Tip 2: Simulated TestingScreen replacements are very fragile products. We strongly recommend testing before installation. Please simulate the test, i.e., the phone is disassembled, (motherboard + LCD or screen) connect the audio cable and replace it with a new one, turn on the phone and the test is completed. If the test is normal, please install. If it can not be displayed, please contact us at the first time. Please do not force it to install in your phone. Once the screen is installed, we will not take any responsibility.Tip 3: Do not overbend the cableMake sure that the LCD cable is not bent excessively. Bending it more than 90 degrees will result in a black screen.