For emulator installation in the case of a regular immobilizer: 1. Remove glue hermetic from the immobilizer case. 2. Take out a PCB from immobilizer and desolder from it wires. 3. Connect the emulator according to drawing more low. 4. Insert the emulator into the immobilizer case. Description: For bikes immobilizer emulator Description: The emulator of an immobilizer for motorcycles and scooters -ha. Works with all motorcycles and scooters for from 2006 to 2009. Does not demand programmingonly need is connect wires. Completely emulates work of a regular immobilizer, including light-emitting diode work on the instrument panel. Specification: Red with a green strip BATT (+12v) Red with a white strip (+12v) Blue LED (+5v) Yellow with a blue strip K-line Immo-ECU Material: PC+metal colour: green Package Contents: 1 x emulator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.