Description: Easy to Install: adjustable motorcycle fork seal driver is specially designed for easy installation of fork seals Recommended working range: 30mm-45mm Two Piece Split Design: seal installation kit is two piece split ensuring a flexible and frictionless sliding, not affected by any narrow spaces. Easy to Use: 1. Take apart the fork. 2. Slide the old seal off. 3. Inspect the stanchion for blemishes 4. Oil the inner surface of the new seal with fresh fork oil. 5. Slip the seal over the top of the stanchion and slide it down to the slider. 6. Adjust the tool's plastic fitting to match the size of the seal by loosening the three cross head screws and decreasing or increasing the diameter. 7. Press the adapters against the seal, slide the driver tool up and down several times until seal is pushed into the slider. Carbon Steel Construction: high strength, front forks seal driver with extra durability and longevity Specification: Material: Carbon Steel Size Chart: 8cmx8cmx6cm/3.15inchx3.15x2.36inch Package Includes: 1 Set Fork Seal Driver Tool Note: 1. Please allow slightly error due to manual measurement. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. 3. Wish you a wonderful online shopping!