Description Convenient toothbrush holder, feel the beauty of home Nail-free installation, wear and rust resistant, strong bearing capacity, not afraid of moisture 2 colors, from the simplest to the more original, comfort always follows you Black toothbrush holder, white toothbrush holder No punching to make the wall non-destructive You can install it yourself, no need to install the master Note: different batches and different packaging without nail glue can be used with confidence Punch-free / punch-free installation combines two installation methods, which can be dual-use Without punch suitable for wall surface Smooth ceramic tiles, marble with texture, smooth wood, smooth metallic glass Surface suitable for screw installation: painted walls, wallpaper, plaster walls, etc. A person is not afraid of humidity, and the humid environment can be stable without falling or rusting The toothpaste holder is easy to carry and can not be stored Hanging independently for protection oral health for the whole family, it is easy to use and store as well as the backdrops Reverse the mouthwash cup to drain the water to avoid dust and mold, and the body cup hangs upside down to quickly drain the bottom of the cup without clogging Round and smooth, safe and wont hurt your hands, and the one-piece solid panel finely grinds edges and corners to avoid hurting your hands Product parameters Name: Toothbrush holder Scope of application: bathroom, toilet, balcony, etc. Material: stainless steel paint Installation method: nailless installation / punch hole installation Surface treatment: baking finish process Features: not easy to rust, not easy to fade , strong and durable Note: All dimensions are measured manually, there may be some errors, subject to the actual product Installation steps without nail glue 1. Select the position and mark with a pen 2. Mark the position of the punch 3. Use a 6mm drill bit to make holes 4. Inject plastic expansion material 5. Secure and tighten the screws 6. Press and hold the cap to complete the installation. Punch installation steps 1. Select the location and wipe it with a cloth 2. Mark the position 3. Apply the glue evenly to the bottom plate 4. Stick on the wall and press firmly to paste the auxiliary stickers 5. After waiting 48 hours 6. Peel off the auxiliary sticker and you can use it normally Delivery quantity: 1 * pcs