Automatic Water Level Control for Valve Tower for Tank Floating Ball for Valve

¥2,399
配送料無料

Automatic Water Level Control for Valve Tower for Tank Floating Ball for Valve

  • ブランド: Unbranded

Automatic Water Level Control for Valve Tower for Tank Floating Ball for Valve

  • ブランド: Unbranded
価格: ¥2,399
販売元:
¥2,399
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

["This for valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, etc.\r\nAutomatic control, low self-complementary water, water full automatic stop\r\nFour intakes, large volume of water\r\nBeautiful appearance, small size, practical, simple installation\r\nWithout electricity, easy to use, long life, low failure rate, saving water resources\r\nWorking pressure range: 1-10KG (0.1-1MPa)\r\nApplicable Medium: clean water\r\nApplicable Medium temperature: ≤70℃\r\nResistance to high temperature medium temperature: 70℃~120℃ \r\n\r\nWhen the pool or for tank water levels fall, the for valve body will sink down and then the forerunner of the control for valve will be opened. As the pipe water pressure affects, the seal face of control for valve will be opened. Finally the water comes out and vice versa. \r\n \r\nNote:\r\nThis production belongs to the liquid level control valves. When installed, the float must be vertical. if you need to install from the top , a Elbow needed to connect the float for valve and the inlet line. Firstly, the feed line should be fixed in horizontal plane and then connect the automatic water level control for valve on the water inlet according to the standard. The main water inlet should be lined with the control valves' Normal Diameter. When using, the globe for valve should be all open. If two valves are installed in the same pool, the two valves should be held in the same horizontal plane. Before installing, please clean the impurities in the pipes in for case of blocking.\r\nIf the water quality is not good, then the valves need to be maintained properly.\r\nIf the users find the for time of adding water becomes longer, he can just upload the water inlet and make it washed\r\n\r\nMaterial: Nylon PA66+Food grade rubber\r\nSize: 72x50x70mm\r\nQuantity: 1 Pc\r\nNote:\r\nPlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid\r\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\r\n\r\nPackage Contents:\r\n1 x Water Level Control for Valve"]
  • Fruugo ID: 373397250-808667228
  • EAN: 7919001437407

配送と返品

24時間以内に発送

  • STANDARD: 無料 - 間の配達 水 01 10月 2025–月 06 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Shenzhen Jianming Technology Co., Ltd.
  • Shenzhen Jianming Technology Co., Ltd.
  • 611, 6th Floor, Longsheng Commercial Building, Dalang Street
  • Shenzhen
  • China
  • 518000
  • sueooxem6w@163.com
  • 18818900735

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • Yating He
  • E-CrossStu GmbH
  • 69 Mainzer Landstrasse
  • Frankfurt am Main
  • Germany
  • 60329
  • E-crossstu@web.de
  • +4969332967674