Features: 1. When the washing machine does not have the power to open the faucet to fill the water, water inlet for valve failure 2. Water inlet: check if the inlet for valve filter is blocked;Is the tap water too low?All three conditions are normal and 99% water inlet for valve failure 3. No water: standard mode start/begin washing machine, detection of inlet for valve connection on both ends of the output voltage 220 v, if there is a import for valve fault, if there is no less than 220 v voltage or not on the inlet for valve.(professionals can use the multimeter, measure and no multimeter, researcher were able to find a small power 220 v electrical received fill for valve test on both ends of the connection, not sure do not operation, the maintenance way does not assume any legal liability) Water Double Inlet for Valve only,other accessories in the picture is not included. brand new and high quality suitable for washing machineWasher inlet for valve inlet valveNecessary repairsCommon phenomena of water inlet for valve Specifications: Material: ABS+Metal Size: About.80x57mm/3.14x2.24inch Note: Please allow 1-2cm errors due to manual measurement,please make sure that you do not mind before you order. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Note : The matching original model is: FPS180A water inlet for valve. Package includes: 1 Piece Water Inlet for Valve