Description Features: Straight flow, large flow, no blockage by slag. Good water and dirt resistance (IP65). The actuator is easy to disassemble and assemble. The actuator can be installed after the equipment and piping are installed to improve efficiency. The LED indicates when the valve is turned on and off to determine whether the valve is fully opened and closed. Highly energy-saving, durable design. Tightly closed due to high pressure when closing. Actuator can be mounted in two directions. Specifications: Medium: Cold/Hot water, 60% ethylene glycol Material: Brass Power supply: AC 220V Model: DN25(G 1) Structural forms: Three ways Operation mode: Three floating points (24V AC) or ON/OFF Power: 6W (Only when valves are opening and closing) Running time: 5-15 seconds Nominal pressure: 1.6 MPa Average temperature: 2~95C Maximum differential pressure: 1.0 MPa Protection class: IP65 Connection mode: ZG internal thread Overall size: 8 x 6 x 13.5cm / 3.15 x 2.36 x 5.31 Quantity: 1 piece Note: Please allow 1-3mm error due to manual measurement. Please make sure you do not mind before bidding. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you. Package includes: 1 x Ball Valve 1 x User Manual