1. How to replace the bandsaw tire? - Unplug the bandsaw, release the saw blade tension, and remove the saw blade. Then remove the bandsaw wheel. - After removing the bandsaw wheel, thoroughly clean or cut off the old tire and any remaining residue. - Fit a part of the tire onto the rim, and then insert a short rod or tube between the tire and the wheel. Roll the tube around the rim to make the elasticity of the tire uniform. - Squeeze a small amount of glue onto a brush and apply it to the surfaces of the tire and the wheel. Roll and repeat the operation until the entire rim is coated. Let the glue dry for 24 hours before using the saw. 2. Diameter: Suitable for 10 - inch (250 mm) bandsaw wheels. 3. Recommended length of the bandsaw blade: 1826 mm. 4. Width: 12 mm. 5. Thickness: 3 mm. 6. Material: Rubber. 7. Color: Black. 8. Package contents: - 2 rubber bandsaw tires. - Only the items mentioned above are included in the package, and other items are not included. 9. Note: - Light and different displays may cause slight differences between the color of the item and the actual product. - The allowable measurement error is plus or minus 1 - 3 cm.