Feature: 1. Applicable Range: This ferrule puller can remove leaking compression sleeves without damaging the wall, pull the nut out of the pipeline, and suitable for disassembling 1/2 inch copper water compression sleeves. 2. No Pipe Damage: The redesigned warhead will not fall off, and suitable for use in relatively tight areas, and can easily remove the old compression ring and reshape the curled copper tube into a perfect circle. 3. Convenient Use: Even if the valve is corroded or frozen, the old compression sleeve can be removed to ensure that the puller is correctly aligned with the pipeline, and then the handle can be turned 10 turns. 4. 2 Removal Methods: Place the ferrule between the red notch end of the tool to remove the ferrule, place the red end behind the compression nut, engage the silver head end into the ferrule, to remove compression nut and ferrule after pulling out the tool. 5. Excellent Metal: The compression sleeve puller is made of excellent chromium vanadium steel, with high strength, wear resistance and corrosion resistance, and can be used in various harsh environments. Specification: Item Type: Compression Sleeve Puller Material: Chromium Vanadium Steel. Package List: 1 x Compression Sleeve Puller