【High illumination and energy saving 】 - This solar street light with large solar panel and 8 long-lasting LEDs is only exposed to sufficient sunlight, the garden light can light up for 8-10 hours with 4-6 hours charging time solar energy. The energy conversion rate can reach 17%. save as much energy (charging and working times change depending on the weather). 【Auto light sensor 】 Solar Street Lamp Turn on the switch under the cap and slide the peg into the ground, lamps parallel to the ground. The lamps themselves provide the power supply and avoid the connection of cables. (Note: If you absorb sunlight, turn on the bottom ON button first.) At night, according to the light sensor, the inground lights will automatically turn on and last all night. 【IP65 waterproof and durable 】 - Solar street lights with IP65 waterproof and high quality ABS for long lasting use even if exposed to the elements such as snow, rain and frost. Solar powered outdoor lights can be a great choice for areas such as gardens, parks, streets, lawns, hallways, etc. 【Easy to install solar garden light 】-Outdoor solar ground lights can be installed in 2-3 minutes. Each lamp has two rivets that can be installed on a sunny floor. Outdoor solar lights sit almost flush with the ground, making it easy to illuminate the edge of a patio. Size: 8 8pcs Solar Street Light 8 LED Solar Lights for Outdoor Garden Solar Garden Light IP65 Waterproof Feature: 1. Upgraded LED inground lights for garden and lawn 2. Comes with twilight sensor with automatic dusk 3. No wiring required and safe for children and pets 4. Ideal for areas where no conventional power supply is available specification: 1. Material: ABS and PP 2. Solar panel power: 1.2V / 600MAH 3. Solar lights for outdoors Charging time: 4-6 hours 4. Working time: when it is is fully charged, lighting can be about 8-10 hours 5. Waterproof protection class: IP65 6. Size: about 11*13*4CM Package Contents: 8 x Solar Street Lights Easy Installation: 1. Align the 2 pins the split-bottom stake with the 2 holes on the back of the solar light and firmly press the split-bottom stake onto the solar light. 2. Put the sunlight in the loose soil where the solar panel can receive direct sunlight.