Nozzle Changing Has Never Been Easier, Effortlessly change nozzles at room temperature using just your fingers alone! No complex tools, no hot tightening. Compatible with RapidChange nozzles to match your printing needs. The belt nozzle is not compatible. High Flow Rates Up to 40mm³/s: The 0.4mm High Flow nozzle and 60W HeaterCore deliver extraordinary flow rates of up to 40mm³/s. Get ready for high-speed, high-efficiency printing. 60W HeaterCore: Heats up quicker while being with its positive temperature coefficient (PTC). Robust Construction: Factory-sealed nozzles, leak-proof and bend-resistant. Technical Type: P1 Maximum Temperature:300℃ Maximum Flow Rate:40mm³/s Nozzle Diameter:0.4mm Nozzle Model:for high Flow Heater Voltage:24V Heater Power:60W Thermistor:NTC100k Length:47.3mm Compatibility:For P1P, P1S Material: plastic+metal+brass colour: As shown Package Contents: 1 x Panda Hotend Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.