Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.12sec/60° at no load Operating Speed (6.0V): 0.10sec/60° at no load Stall Torque (4.8V): 38.8 oz/in. (2.8kg.cm) Stall Torque (6.0V): 47.2 oz/in. (3.4kg.cm) Operating Angle: 40 Deg. one side pulse traveling 400usec 360 Modifiable: No Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 8.8mA/idle and 220mA no load operating Current Drain (6.0V): 9.1mA/idle and 280mA no load operating Dead Band Width: 8usec Motor Type: 3 Pole Ferrite Potentiometer Drive: Direct Drive Bearing Type: None, outer case serves as bearing Gear Type: 4 Metal and 1 Nylon Connector Wire Length: 6.29" (160mm) Dimensions: 1.17" x 0.47"x 1.16" (29.8 x 12 x 29.6mm) Weight: 0.66oz (19g) packing content: 100% 1x Hitec HS-82MG Universal Micro Servo HRC32082S