Description: The material of the curling iron is brass, and it can be used when it is installed on the handle of the flower iron, and the handle can be adjusted in temperature. How to use: First install the curling iron and the anti-scalding bracket on the temperature control handle, then turn on the wire switch, and start to turn to the highest temperature to quickly heat up. After a while, touch it on the wet towel and it will listen. By the sound of ZZ, the temperature is very high. Then adjust to a low temperature of 60-100 degrees, wait a while for the temperature to drop, and then start curling the baby! Note: 1. The latest handle color is wood color, not brown red. 2. When curling your baby's hair, do not overheat it to avoid breaking the hair. Adjust it to a low temperature and try again if the temperature is not enough. 3.The new hot stamper will heat up when it is energized for the first time, and there will be smoke. Don't worry, this is normal. Specification: Product Name: DIY Limited BJD Doll Curling Iron Diameter of hot rod: 2/3/4/5MM Hot rod material: brass Handle color: wood color Voltage: AC 110V or 220V